|
Polysulfone Hex Rods
Rigid Amber semi - transparent plastic with excellent
steam resistance that is autoclavable and FDA compliant. It has excellent
radiation stability.
Polysulfone Hex Rods are used in medical
applications since it is autoclavable. It is
Semi-Transparent. It Maintains Oxidative and Hydrolytic stabilities.
Polysulfone is known for its toughness and stability at high temperatures.
Highly resistant to mineral acids, alkali and electrolytes. It can be
cleaned with bleach. Resistant to hydrocarbons. Its high hydrolysis
stability allows its use in medical autoclave conditions. Its flame resistance
is UL 94-V-0 at 1/4" thickness (6.35mm) and UL 94-V-2 at 1/8"
thickness (3.175mm).
Technical Data Sheet
Chemical
Resistance
| Polysulfone
Hex Rods |
| Tolerance
across Flats +-.005 |
| 10'
Standard Lengths, Cut to 5' Lengths for Shipping. |
| Width
Across Flats Inches |
Stock
Order# |
Price
Per Foot |
Min.
Ft to Purchase |
Purchase
Online |
| 0.375 |
KHR-115 |
$19.19 |
10 |
Buy
Now |
| 0.750 |
KHR-118 |
$41.83 |
10 |
Buy
Now |
| 1.000 |
KHR-119 |
$55.51 |
10 |
Buy
Now |
| 1.250 |
KHR-120 |
$72.77 |
10 |
Buy
Now |
| 1.500 |
KHR-121 |
$121.16 |
5 |
Buy
Now |
| 1.750 |
KHR-122 |
$172.35 |
5 |
Buy
Now |
| 2.000 |
KHR-123 |
$218.63 |
5 |
Buy
Now |
| Physical
Properties |
| Density |
0.0448
lb/in³ |
ASTM
D792 |
| Water
Absorption |
0.30% |
24
hrs.; ASTM D570 |
| Mechanical
Properties |
|
|
| Hardness,
Rockwell R |
120 |
ASTM
D785 |
| Tensile
Strength, Ultimate |
10100
psi |
ASTM
D638 |
| Elongation
at Break |
50.0
- 100 % |
ASTM
D638 |
| Tensile
Modulus |
360
ksi |
ASTM
D638 |
| Flexural
Modulus |
392
ksi |
1%
Secant; ASTM D790 |
| Flexural
Yield Strength |
15400
psi |
ASTM
D790 |
| Coefficient
of Friction |
0.37 |
Dynamic,
40 psi, 50 fpm; ASTM D3702 |
| Izod
Impact, Notched |
1.29
ft-lb/in |
ASTM
D256 |
| |
|
|
| Electrical
Properties |
|
|
| Electrical
Resistivity |
5.00e+16
ohm-cm |
ASTM
D257 |
| Dielectric
Constant |
3.1 |
60
Hz, 50% RH; ASTM D150 |
| Dielectric
Constant, Low Frequency |
3.1 |
60
Hz, 50% RH; ASTM D150 |
| Dielectric
Strength |
419
kV/in |
ASTM
D149 |
| Dissipation
Factor |
0.001 |
60
Hz; ASTM D150 |
| |
|
|
| Thermal
Properties |
|
|
| CTE,
linear 20°C |
31.0
µin/in-°F |
ASTM
D696 |
| Maximum
Service Temperature, Air |
286
°F |
Long
Term |
| Deflection
Temperature at 0.46 MPa (66 psi) |
358°F |
ASTM
D648 |
| Deflection
Temperature at 1.8 MPa (264 psi) |
345
°F |
ASTM
D648 |
| Flammability,
UL94 |
V-O |
ASTM
D648 |
Note: Shipping charges will apply to all orders, and
will vary depending on Customer ship to location, pricing does not reflect
shipping charges
| |
|
